Operating Instructions - Stihl BR 700 Manual De Instrucciones

Stopping the Engine
Push the setting lever in the
N
direction of † – the engine stops –
the setting lever then springs back
automatically.
If engine does not start
Choke knob
If you did not turn the choke knob to n
quickly enough after the engine began to
fire, the combustion chamber is flooded.
1
2
Push the setting lever (1) upwards.
N
The throttle trigger (2) is in the full
throttle position.
Continue cranking until the engine
N
runs.
BR 700, BR 700 X
Other Hints on Starting
If the engine does not start
Check that all settings are correct.
N
Check that there is fuel in the tank
N
and refuel if necessary.
Check that the spark plug boot is
N
properly connected.
Repeat the starting procedure.
N
Check adjustment of throttle cable –
N
see chapter on "Adjusting the
Throttle Cable".
Engine stalls in cold start position c or
under acceleration
Move the choke knob to o and
N
continue cranking until the engine
runs.
Engine does not start in warm start
position o
Move the choke knob to c and
N
continue cranking until the engine
runs.
Fuel tank run until completely dry
After refueling, press the manual
N
fuel pump bulb at least five times –
even if the bulb is filled with fuel.
Set the choke knob according to
N
engine temperature.
Now start the engine.
N

Operating Instructions

During Operation
After a long period of full throttle
operation, allow the engine to run for a
short while at idle speed so that engine
heat can be dissipated by the flow of
cooling air. This helps protect engine-
mounted components (ignition,
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the
engine to cool down. Keep the machine
in a dry place, well away from sources of
ignition, until you need it again. For
longer out-of-service periods – see
"Storing the Machine".
English
19