Operating Instructions; Replacing The Air Filter - Stihl BR 500 Manual De Instrucciones

Turn the choke knob to n.
N
Move the setting lever (1) to C.
N
Engage the throttle trigger (2) in the
N
full throttle position.
Continue cranking until the engine
N
runs.
Throttle cable adjustment
Check adjustment of throttle cable –
N
see chapter on "Adjusting the
Throttle Cable".
If fuel tank has been run completely dry
and then refueled
After refueling, press the manual
N
fuel pump bulb at least five times –
even if the bulb is filled with fuel.
Set the choke knob according to
N
engine temperature.
Now start the engine.
N
BR 500, BR 550, BR 600

Operating Instructions

During Operation
After a long period of full throttle
operation, allow the engine to run for a
short while at idle speed so that engine
heat can be dissipated by the flow of
cooling air. This helps protect engine-
mounted components (ignition,
carburetor) from thermal overload.
After Finishing Work
Storing for a short period: Wait for the
engine to cool down. Keep the machine
in a dry place, well away from sources of
ignition, until you need it again. For
longer out-of-service periods – see
"Storing the Machine".

Replacing the Air Filter

Dirty air filters reduce engine power,
increase fuel consumption and make
starting more difficult.
If there is a noticeable loss of engine
power
Turn the choke knob to l.
N
Loosen the screws (1).
N
Remove the filter cover (2).
N
English
21