cecotec DRUMFIT JUMP 920 Manual De Instrucciones página 48

ENGLISH
5. CLEANING AND MAINTENANCE
- Always check and tighten all parts of the product before using the equipment.
- Use a mild cleaning agent to clean the equipment and avoid chemical solvents.
- Check that the circular cover covers the springs/strings.
- Check that the jumping mat and protective elements are in good condition and can support
the weight of the user and replace them if necessary.
- Replace the jumping mat every 3 years.
6. TECHNICAL SPECIFICATIONS
Product reference: 07194
Product: Drumfit Jump 920
Maximum user weight: 100 kg
Size: 91 x 91 x 80 cm
Technical specifications may change without prior notification to improve product quality.
Made in China | Designed in Spain
7. RECYCLING
The product must be disposed of separately from household waste.
When this product reaches the end of its useful life, it should be taken to a suitable place for
recycling. For detailed information on the most appropriate way to dispose of the product, the
consumer should contact the local authorities.
Compliance with the above guidelines will help protecting the environment.
8. TECHNICAL SUPPORT AND WARRANTY
Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at the
time of delivery of the product under the terms, conditions, and deadlines established by the
applicable regulations.
It is recommended that repairs be carried out by qualified personnel.
If at any moment you detect any problem with your product or have any doubt, do not hesitate
to contact the official Cecotec Technical Support Service at +34 963 210 728.
48
DRUMFIT JUMP 920