GE P2S975 Manual Del Propietário página 31

GEApp/iances.com
Receetacie
Socket
G6.35 B ulb
/
Glasscover
(onsomemodels)
z i i i i
Glasscover
(onsomemodels)
Oven Light Replacement (onsome models)
WARNING: S HOCK DR
BURN HAZARD. Before replacing oven
light bulb, disconnect the electrical power
to the range at the main fuse or circuit
breaker panel. Failure to do so may result
in electric shock or burn.
A CAUTION: B URN HAZARD
The glass cover and bulb should be
removed when cool. Touching hot glass
with bare hands or a damp cloth can
cause burns.
TO remove:
%
Turn the glass cover
counterclockwise 1l/4 ann until
the tabs of the glass cover clear the
grooves of the socket. Wearing latex
gloves may of_b.r a better grip.
[-_ Using gloves or a (h T cloth, remove
the bulb by pulling it straight out.
Toreplace:
[_ Use a new 120/130-volt halogen
bulb, not to exceed 50 watts.
Replace the bulb with the same type
of bulb that was removed. Your
model will have one of the two types
shown on the left. To demrmine
the correct replacement bulb, check
the btflb temfina/s. Bulbs with 2
suaight pin terminals are G6.35
bulbs. Bulbs with 2 looped mrmina/s
are G9 bulbs. (Be not interchange.}
Be sure the replacement bulb is
rated 120 volts or 130 volts (NOT
12 volts).
Using gloves or a d, T cloth, remove
the bulb flom its packaging. Do not
touch the bulb with bare fingers.
Oil flom skin will damage the bulb
and shorten its life..
Push the bulb straight into the
receptacle all the way.
Place the tabs of the glass cover into
the grooves of the socket. Tmn the
gk_sscover clockwise 1l/4 turn.
For improved lighting inside the
oven, clean die gk_ss cover
flequently using a wet cloth. This
should be done when the oven is
completely cool.
[_] Reconnect electrical power to
the range.
Wirecoverholder
Oven Light Replacement (on somemodels)
Be sure to let the light cover and bulb
cool completely:
To remove the cover
% HoM a hand trader the cover so
it doesnt fall when I eleased. ¼,1th
fingers of the sane hand, firmly
push back the wire cover hoMer
i JR off the cover
*90 ROtremove aR}/ screws to remove the covefi
Replace bulb with a 404vatt
appliance bulb.
Toreplacethe cover:
%
Place it into groove of file light
receptacle. Pull whe fbrward to
the center of the cover until it snaps
into place.
[_ Connect electrical power to the
range.
31