GE P2S975 Manual Del Propietário página 29

Careandc/ean&goftherange. CEAppliances.co
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
A WARNING:
If _our range is removed for cleaning, servicing or any
reason, be sure the anti-tip device is reengaged properly when the range is
replaced, Failure to take this precaution could result in tipping of the range and
cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Careflflly grasp a corner of die protective
shipping film with your fingers and slowly
peel it flom dte appliance surfime. Do
not use any sharp items to rein(we the
filmo Remove NI of the film before using
the appliance for the first fimeo
To ensure no damage is done to rite
finish of fire product, fire safest way to
remove the adhesive flom packaging tape
on new appliances is an application of a
household liquid dishwashing demrgent.
Apply with a soft cloth and Nlow to soak°
NOTE:Theadhesive mustbe removed fromall
parts It cannotberemoved if it is bakedon
Frontrightburne-
Burnercae( )
Burnerhead
-lectrode-_ __
Burnerhas
Make sure the hole in theburner
headis positioned over the electrode
and that the burner head is fully
inserted inside the burner base.
A stoodgap between the base and
dean is normal
Front left burner, back right Burner
andback leftburner
Sta_
chamber neeu e or
__1 E/VIS[-_i£ 10
UnClOgme
small ROle In
me Burner
Burner base "" neau
-lectrode
Makesuretheslot& theburnerhead
is
positioned over
the electrode.
The bumer cap
hasthreeto
four pins.
Whenreplacing the cap,make
surenoneof thepinssirsin
thestabilitychamber.
Burner Caps and Heads
The burner assemblies should be washed
regularly and, of course, after spillove_s.
Turnall controls off before removing bumer parts
The burner grates, burner heads and
burner caps can be removed f_>r easy
cleaning.
The elecuode of dte spark igniter is
exposed beyond dte surfime of dte
burner base. _,qten cleaning the cooktop,
be careflfl not to snag the electrode of
the spark igniter with your cleaning
cloth. Dmnage to the ignitor could occur
Toavoid snagging a cloth on the spark
_gniter, leave the burner heads in place
when cleaning the cooktop.
Be careflfl not to push in any cooktop
controls while cleaning the cooktop.
A slight electrical shock might result
which could cause you to knock over
ho12 cookw_tre.
Wash burner parts widt an a/l-purpose
non-}d)i}tsive
cleaner and _,v}li+Itt _,v}t[eI.
Soak stubborn soil. DIT them with a
cloth--do not reassemble while wet.
it CAUT/ON: Bo N oT OPERATE
THE BURNER WITHOUT ALLBURNER PARTS
IN PLACE,
To reassemble, replace the burner head
first, then the burner cap and finally the
burner grate.
Make sure that the heads and caps are
replaced in the correct locations. There
is one small, one medium, one large
and one extra large burner head
_md cap.
Mediumburner Sma burne;
headandCap head andcap
,
0 O
• 0
Large burner Extralarge burner
head andCaP head andcap
29