Troubleshooting; Generator Set Trouble - GENERGY GDS20T Instrucciones De Uso

7. Troubleshooting

When performing any troubleshooting, follow the guideline below. For detailed
troubleshooting procedures about engine and alternator, refer to engine and
alternator operator's manual.
Keeping engine oil level, making battery connections clean and tight, checking
fuel level, not overloading etc. will prevent most shutdowns.
Contact our authorized distributor to ask for help for complicated maintaining
and replacing operation.
WARNING
1) Performing troubleshooting should be carried out by a licensed
engineer.
2) Before performing any troubleshooting, stop engine and always allow
engine to cool because hot engine parts can cause severe burns.

7.1 Generator set trouble

Trouble
Low engine oil pressure
High coolant temperature
Low fuel level
Power drops after running a
period of time
Cause
1.Lubricant oil is insufficient
2.Oil hose has leak
3.Oil filter is clogged
4.Wrong oil is used
1.Coolant is insufficient
2.Coolant pipe has leak
3.Fan belt is loose
4.Radiator core is clogged
5.Water temp sensor is defective
6.Engine thermostat is defective
1.Fuel is insufficient
2. Fuel pipe has leak
3. Fuel tank has leak
4. Fuel filter is clogged
1.Air filter element is clogged and air is
insufficient
2.Fuel filter is clogged and fuel is
insufficient
3.Engine ignition time is incorrect
62
Solution
1. Add lubricant oil
2.Tighten or change oil hose
3.Change oil filter
4.Change to proper kind oil
1.Add coolant
2.Tighten or change coolant pipe
3.Tighten the belt
4.Clean radiator core
5.Repair or change the sensor
6.Repair or change the thermostat
1.Add fuel
2.Tighten or change fuel hose
3.Repair or change fuel tank
4. Replace the fuel filter
1.Clean or change air filter element
2. Replace the fuel filter
Adjust the ignition time as required