cecotec AIRCLIMA 9000 SMARTFRESH Manual De Instrucciones página 113

11. Turbo function
- To activate the turbo function, press and until will appear on the display.
- Press again to cancel this function.
- In cooling/heating mode, when you select the TURBO function, the appliance will switch
to fast cooling or fast heating mode, and operate the highest fan speed to blow a strong
airflow.
12. MUTE function
1. To activate this function, press and until will appear on the display. Press again to
deactivate this function.
2. When the mute puncture is executed, the remote controller will display the automatic fan
speed, and the indoor unit will operate at the lowest fan speed to be quiet.
3. Pressing the FAN / TURBO / SLEEP button will cancel the MUTE function. The mute function
cannot be activated under the drying mode.
13. SLEEP function
- To activate the turbo function, press and until will appear on the display.
- Press again to cancel this function.
- After 10 hours of operation in sleep mode, the air conditioner will switch to the previous
setting mode.
14. I FEEL function
- To activate this function, press and until will appear on the display. Press again to
deactivate this function.
- This function allows the remote control to measure the temperature at your current
location and send this signal to the air conditioner to optimise the temperature around
you and ensure comfort.
- This mode will be automatically deactivated after 2 hours.
15. ECO function
- Under this mode, the appliance automatically configures the operation to save energy.
- Pressing the button
- will cause
- to appear on the display and the device will operate in ECO mode. Press again to cancel.
- NOTE: The ECO function is available in cooling and heating modes.
AIRCLIMA 9000 SMARTFRESH/ AIRCLIMA 12000 SMARTFRESH/ AIRCLIMA 18000 SMARTFRES/
AIRCLIMA 24000 SMARTFRESH/ AIRCLIMA 12000 SMARTFRESH CONNECTED
ENGLISH
113