cecotec AIRCLIMA 9000 SMARTFRESH Manual De Instrucciones página 111

- or
- button to set a higher temperature than the room temperature.
Warning: in heating operation, the appliance may automatically activate a defrost cycle,
which is essential to clear frost on the condenser to recover its heat exchange function. This
procedure usually takes 2 to 10 minutes. During defrosting, the indoor unit fan stops running.
After defrosting, it returns to heating mode automatically.
6. FAN SPEED function (FAN button)
- Change the fan operating speed.
- Press the button
- to adjust the speed of the running fan, it can be set to automatic speed:
7. Child lock function
1. Press the
and
2.
buttons for a long time to activate this function and press it again to deactivate this
3.
function.
4. Under this function, no button will be activated.
8. TIMER function (TIMER) Timer on
- To switch the device on automatically.
- When the unit is switched off, you can activate TIMER ON
- To set the automatic power-on time, as follows:
1. Press the button
the first time to set the power on
2.
3. , and will appear on the display and flash.
4. Press the button
or
5.
to set the desired power-on timer. Each time you press the button, the time will increase
6.
or decrease by half an hour between 0 and 10 hours and by one hour between 10 and 24
hours.
7. Press the button
to confirm.
8.
AIRCLIMA 9000 SMARTFRESH/ AIRCLIMA 12000 SMARTFRESH/ AIRCLIMA 18000 SMARTFRES/
AIRCLIMA 24000 SMARTFRESH/ AIRCLIMA 12000 SMARTFRESH CONNECTED
ENGLISH
111