cecotec AIRCLIMA 9000 SMARTFRESH Manual De Instrucciones página 112

ENGLISH
9. After setting the timer, set the desired mode (Cool/Heat/Auto/Fan/Dry), press the button
and set the required fan speed by pressing the button and press or to set the required
operating temperature.
To cancel this function press the
.
9. TIMER function (TIMER) Timer off
- To switch the device off automatically.
- When the unit is switched on, you can deactivate the timer.
- To set the automatic power-off time, as follows:
1. Confirm that the device is switched on.
2. Press the button
the first time to configure the shutdown. Press or to set the required timer.
3.
4. Press the button the second time to confirm.
To cancel this function press the
.
NOTE: All programming must work within 5 seconds, otherwise the configuration will be cancelled.
10. SWING function (OSCILLATION)
1. Press the SWING button to activate the louvres.
2. Press
to activate the horizontal flaps to oscillate up and down, the
will appear on the remote display.
3. Do it again to stop the oscillation at the current angle.
4. If the vertical deflectors are manually positioned under the flaps, you can move the airflow
directly to the right or left.
5. Press and hold for 3 seconds to select more angles of airflow direction.
- Never attach the "Flaps" manually! The mechanism is delicate and could be seriously
damaged.
- Never stick fingers, sticks or other objects into the ventilation air inlet or outlet. Such
accidental contact with live parts may cause unforeseeable damage or injury.
112
AIRCLIMA 9000 SMARTFRESH/ AIRCLIMA 12000 SMARTFRESH/ AIRCLIMA 18000 SMARTFRES/
AIRCLIMA 24000 SMARTFRESH/ AIRCLIMA 12000 SMARTFRESH CONNECTED