Idiomas disponibles
Idiomas disponibles
4. OPERATION
Operation instructions
If an attempt is made to use the air conditioner at a temperature higher than the specified
temperature, the air conditioner's protection device may start and the air conditioner may stop
working. Therefore, try to use the air conditioner in the following temperature conditions:
Temperature
Room temperature
External temperature - 20 – 30
With the power supply connected, restart the air conditioner after switching it off or switch
it to another mode during operation, and the air conditioner's protection device will start up.
The compressor will restart after 3 minutes.
Heating operation characteristics (applicable to the heating pump)
Preheating
When the heating function is activated, the indoor unit will take 2 to 5 minutes to preheat,
after that the air conditioner will start to heat up and blow warm air.
Defrost
During heating, when the outdoor unit freezes, the air conditioner enables the automatic
defrosting function to improve the heating effect. Durante la descongelación, los ventiladores
interior y exterior dejan de funcionar. The air conditioner will resume heating automatically
after defrosting is completed.
Emergency button
Open the panel and look for the emergency button on the electronic control box when the
remote control fails. (Always press the emergency button with insulating material).
Current status
Operation
Standby
Press the emergency
button once
AIRCLIMA 9000 SMARTFRESH/ AIRCLIMA 12000 SMARTFRESH/ AIRCLIMA 18000 SMARTFRES/
Mode
Heating (º C)
Cooling (º C)
0 – 30
17 – 32
- 15 – 53
Reply
A short beep is emitted
AIRCLIMA 24000 SMARTFRESH/ AIRCLIMA 12000 SMARTFRESH CONNECTED
Dehumidification (º C)
Enter into mode
Refrigeration mode
ENGLISH
109
