Selftimer/Remote control
signal
Voyant de
retardateur/télécommande
Sehal del
autodisparador/control
remoto
Remote control window
Fenétre de
télecommande
Ventana del contro!
remoto
HOW TO TAKE A PICTURE USING THE
REMOTE CONTROL
HI Compose the picture, aim the remote control at the
Remote control window on the camera, then press the
Shutter release button to take a picture
© The Selitimer/Remote control signal blinks for approx. 3
seconds before the picture is taken. If the signal does not
blink when the Shutter release button is pressed, move
closer to the camera and press it again. The signal does
not light when there is frequency interference. In such a
case, change the frequency according to the remote control
instructions.
© See page 154 for using the Remote control in the Display
mode.
Note:
'@ The working distance may be reduced in brightly
litareas, such as under direct sunlight.
Do not subject the Remote control window to
bright light.
@ When using the remote control to take a picture,
if it is not operated for approx. 3 minutes, the
mode will be canceled.
