Medela Symphony Manual Del Usuario página 4

1. Important safety information (cont.)
4
• The Symphony breast pump should never be left unattended when plugged into a power source.
• Separation from the mains is only assured by disconnecting the power cord from the wall socket.
• Position the pump unit such that it is easy to disconnect the power cord from the wall socket.
• Keep the power cord away from heated surfaces.
To avoid health risk and reduce risk of injury:
• If problems or pain occur, consult a lactation consultant or breastfeeding specialist.
• Never use while pregnant, unless prescribed/advised by a physician, as pumping can induce labour.
• For mothers who are infected with Hepatitis B, Hepatitis C or Human Immuno-deficiency Virus (HIV): pumping
breast milk will not reduce or remove the risk of transmitting the virus to the baby through breast milk.
• Inspect all components of the Symphony breast pump as well as all parts of the pump set(s) before each use.
• Never use a device, components or parts that are damaged.
• Never use a device, components or parts if dirt, mould or other contamination is visible.
• Replace mouldy, damaged or worn parts.
• There are no user-serviceable parts inside the Symphony pump unit. Repairs must only be performed by
an authorised service agency. Do not attempt to repair the pump or parts by yourself.
• Only use the Symphony breast pump for its intended purpose as described in these instructions for use.
• Only use Medela original accessories.
• Do not modify any parts of the pump or the pump set.
• Do not use the Symphony breast pump while operating a motor vehicle.
• Do not drive whilst hands-free pumping.
• Never drop or insert any object into any opening or tubing.
• Do not use outdoors.
• Supervision is necessary when the Symphony breast pump is used in the vicinity of children.
• Portable and mobile radio frequency communications equipment can affect the Symphony breast pump.
• The Symphony breast pump needs special precautions regarding EMC (Electromagnetic Compatibility).
Install and put into service according to the EMC information provided in these instructions for use.
WARNING