Dometic FreshWell FWX4350EHP Instrucciones De Montaje Y De Uso página 29

Equipo de aire acondicionado de cajón
Ocultar thumbs Ver también para FreshWell FWX4350EHP:
 
Switching the under-bench air conditioner on or to standby
Press the
button.
A signal tone sounds.
Switched on: After a few minutes the under-bench air conditioner starts condition the air to the values that were
set most recently.
Switched to standby: The underbench air conditioner stops conditioning the air.
Switching only the remote control to or from standby
If the remote control is not pointing to the IR sensor (Fig. , 4) on the control panel, the remote control can be acti-
vated or switched to standby independently from the under-bench air conditioner.
Press the
button.
If the remote control is switched to standby, its display shows only the time.
If the remote control is activated, several symbols are shown on its display.
Selecting the air conditioning mode
1.
Ensure the under-bench air conditioner is switched on.
2. Select the desired mode using the
A signal tone sounds. The under-bench air conditioner is switched to the selected mode.
Selecting the blower speed manually
The blower controls the strength of the air supply.
In the "Cooling" ( ), "Heating" (
In the other air conditioning modes the under-bench air conditioner controls the blower level automatically and the
remote control displays only the blower level symbols without the corresponding code.
1.
Ensure that the under-bench air conditioner is switched on.
2. Ensure that the "Cooling" ( ), "Heating" (
3. Use the
button to select the desired blower level.
Display message
Symbol
A signal tone sounds. The new blower level has been set.
The blower level code disappears after a few seconds and the set temperature is displayed.
MODE
button (see
) and "Circulating air" (
) or "Circulating air" (
Description
Code
Low blower level
F1
Medium blower level
F2
High blower level
F3
Not available in the "Cooling" (
Automatic blower mode, only available in the "Cooling" (
ing" (
) modes.
Air conditioning
modes).
) modes the blower levels can be selected manually.
) mode is activated.
) mode.
EN
)and "Heat-
27
loading