TRAPP TRF 50 Manual De Instrucciones página 57

www.trapp.com.br
2
To operate with dry products
(grains):
Place the sealing cover (1).
 
Place the green crop feeder cover (5).
 
Select a suitable strainer (diameters 0.8 - 3 - 5 -
 
12 mm). The resulting product depends on the
diameter of the strainer used.
The dry product is placed in the grain funnel (2),
 
and then forwarded to be processed. The end
product leaves the shredder through the lower
part.
Be careful not to overload the motor. Regulate
 
the grain input adjuster according to the shredder's
capacity to grind and to the strainer chosen. The
regulation of the grain input adjuster is done in
the following way: loosen the wing nut (3) located
underneath the grain input adjuster. Once the
regulator (4) is free, pull in case you need a bigger
opening, and push in case you need a smaller
opening. After regulating, tighten the wing nut (3).
Operation
57