TRAPP TRC-40 Manual De Instrucciones página 33

www.trapp.com.br
Fixing must be executed by authorized
 
technicians.
Preserve your equipment. Frequently
 
check if any component is damaged
or check for any other condition that
may affect its optimum operation. Shall
any problem arise, fix it before using the
equipment. Many accidents are caused by
lack of proper maintenance.
Keep the blades sharp and clean.
 
The blades keeps moving after the
 
equipment is switched off. Therefore be
aware of that when servicing.
Note: Do not use the fuel injector when the motor
is hot (TRC-50).
Additional Safety and Operation Instructions
Make sure the voltage of the power source is
 
the same of that of the equipment (TRC-40).
Carefully read instructions and get familiar
 
with the controls and proper used of the
equipment.
Remember that the operator or user is
 
responsible for any accident or damage
involving people or their properties.
Do not operate the equipment barefooted or
 
with sandals.
Always wear adequate shoes and pants,
 
goggles, gloves and ear plugs.
Avoid operating the equipment in humid
 
places.
Use the equipment in a well ligth
 
environment.
Before feeding any kind of foliage, start the
 
motor and wait for it to reach maximum
revolution.
Note: According to the Brazilian standard NBR
5410, it is compulsory to install a device to protect
against residual differential current (DR device) in
the electrical installation. The function of the "DR"
is to protect the user against serious electrical
shock risk (consult an electrician).
5 - Service
Call qualified professionals to service
 
the equipment. Use original parts
only. Always call TRAPP Authorized
Service Technicians. TRAPP is not
responsible for occasional accidents
caused by the use of spare parts that are
not original.
Do not introduce anything in the equipment
 
with the motor off.
Do not use the equipment during periods of
 
power supply failure (TRC-40).
Whenever cleaning or servicing, make
 
sure the motor is off and the blade is still.
Then unplug the equipment.Conserve su
equipamiento.
If the equipment starts to vibrate, unplug
 
it. Check the cause of the vibration as
it indicates that the equipment needs
adjustment and repair.
Check the status of the power supply cord.
 
Never fix it with insulating tape (TRC-40).
Never use a water jet to clean the equipment;
 
use a cloth soaked in neutral detergent.
Water inside the equipment can damage
the electric circuit of the motor, besides
increasing the risk of an electric shock.
33