a)
NOG
~r-
Zo
"7
oO
Fw
ZL
2 O>
t
oP
oD
o Mm ao
oc ~
< a
Se
ye
re
(espace)
(espacio)
(espaco)
- SUPE
Po
pire
af
—e
»
Os
pO
QO. Or a
m
ae
A
rp
f
t
b)
(espace)
¥+.,/,0,1,2,3,4,5,
(espacio)
,
(espaco)
LA
DISPLAY
Preset Tuning
(continued)
To modify a name
Even after pressing the ENTER button, you
can change the character. In step 4 or 5,
press the MEMORY/NEXT button so that
the character to be changed blinks and then
perform steps 4 through 7.
To store the station after assigning
the name
In step 1 above, even if you tuned ina
station other than a preset station, you can
store it with the assigned name.
After pressing ENTER in step 6, press the
two-character code within 8 seconds and
then press ENTER.
a) Character List (ST-S361)
b) Character List (ST-S261)
Displaying the Name EX
You can assign names to stored stations by
doing the procedure on page 42. To display
the name of a stored station, press
DISPLAY. Each time you press DISPLAY,
the display alternates between the station
frequency, name, and digital signal meter.
Station name
Frequency
Digital signal meter*
* For FM, the digital signal meter displays
the strength of the received signal.
For best reception, adjust the direction of
the antenna until the digital signal meter
indicates the signal at its peak strength.
When you tune in an AM (MW/LW)
station, the digital signal metershows
"—— dB" and it does not function.
Notes on the DISPLAY button
When receiving an RDS station, see page 56
for use of the DISPLAY button.
