1
:
MENU
?
TUNING/SELECT
ST-S361
ST-S261
4
ENTER |
3
TUNING/SELECT
32
Preset Tuning
This section shows you how to store and
automatically tune in your favorite stations.
Each station stored for preset tuning is first
assigned a two-character code, consisting of
a letter (A-C) followed by a one-digit
number (0-9). To tune in a stored station,
you simply enter the appropriate two-
character code. You can store up to 30
stations.
Storing Stations Using
ay NU) com ef-s a( ot] 1-1 (-1 4 ail
"Auto-betical select" is the easiest way to
automatically store all FM RDS and FM
stations in your broadcast area. The tuner
first sélects FM RDS stations with the
clearest RDS signal from among the FM
RDS stations broadcasting the same
program and stores them in alphabetical
order without redundancy up to 30
stations. Then the tuner stores FM stations
other than the FM RDS stations from low to
high frequencies. If you want to store FM
and AM (MW/LW) stations one by one, do
the procedure on page 36.
1 Press MENU.
2 Rotate the TUNING/SELECT knob
until "Auto-betical" (ST-S361) or
"AUTO-BET" (ST-S261) appears and
then press ENTER.
3 Rotate the TUNING/SELECT knob
until "Y/N YES" appears ared then
press ENTER.
The tuner scans and stores alIFM RDS
and FM stations in the broadast area.
For RDS stations, the tuner first checks
for stations broadcasting the same
;
program, then stores only theone with
the clearest signal. The selected. RDS
stations are sorted alphabetically by
their Program Service name, tren
assigned two-character codes. For more
details on RDS, see page 50.
After scanning, the display shows the total
number of the stored FM RDS sttions and
then the station stored in A1 is mceived.
(to be wentinued)
