Idiomas disponibles
Idiomas disponibles
Anleitung_SE_1000_digital_SPK7:_
2. Layout and items supplied (Fig. 1-3)
1. Carry handle
2. Tank cover with ventilation
3. Petrol cock
4. Starter cable
5. Motor cover
6. Spark plug cover
7. ON/OFF switch
8. Earthing connection
9. Economy switch
10. 1x 230V~ socket
11. 1x 12V dc safety trip
12. 1x 12V dc connector
13. Overload indicator
14. Operating status indicator
15. Oil warning indicator
16. Choke lever
17. Screwdriver handle
18. Screwdriver insert
19. Spark plug wrench
20. Adapter cable with 12V-socket
21. Oil-filler jug
22. Overload switch
3. Intended use
The unit is designed for applications operated with a
230 V~ and 12 V d.c. current source. Be sure to
observe the restrictions in the safety instructions.
The equipment is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user/operator and not the manufacturer
will be liable for any damage or injuries of any kind
caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
05.05.2011
10:21 Uhr
Seite 13
4. Technical data
Generator:
Protection type:
Continuous rated power P rated (S1) (230 V): 900 W
Maximum power P max (S2 2 min) (230 V):
Rated voltage U rated :
Rated current I rated :
Frequency F rated :
Drive engine design:
Displacement:
Max. power (engine):
Fuel:
Tank capacity:
Engine oil:
Consumption at 2/3 load:
Weight:
L pA sound pressure level:
L WA sound power level
Power factor cos ϕ:
Power class:
Max. temperature:
Max. altitude (above mean sea level):
Spark plug:
Operating mode S1 (continuous operation)
The equipment can be continuously operated with the
quoted power output (P nenn : 900 W).
Operating mode S2 (temporary operation)
The equipment can be temporarily operated with the
quoted power output (P nenn : 1000 W). Afterwards
the machine must be stopped for a while to prevent it
from overheating.
5. Before starting the equipment
Remove the packaging material and check that all
items have been supplied. Place the generator on a
firm, flat surface near the consumer and ensure
proper ventilation.
5.1 Electrical safety:
Check the electric equipment and supply cables.
They must be in perfect condition.
The generator is to be operated only with
equipment whose voltage specifications conform
to the generator's output voltage.
GB
Digital inverter
IP23
1000 W
1 x 230V~ / 1 x 12V d.c.
4 A (230 V)/.6 A (12 V)
50 Hz
4-stroke, air-cooled
52.6 cm³
1.04 kW / 1.4 HP
Unleaded petrol
2.7 l
approx. 0.25 l (15W40)
approx. 0.68 l/h
13 kg
74 dB(A)
94 dB(A)
1
G1
40℃
1000 m
CR4HSB
13
