TRAPP TR-600 Manual De Instrucciones página 50

Frequently check voltage pressure. The belt is

located under the side guard. Unscrew guard
to check voltage pressure. If necessary, adjust
it or replace it. When voltage pressure is not
enough, its life is compromised and impairs
machine performance.
Voltage pressure for shredders TR-600E and

TR-600G is adjusted through the stretching
tensioner, belt side guard.
To start the motor, lever (1) must be in position

(A) when the motor reaches maximum
revolution; slowly unlock lever to position (B).
Do not operate shredder without belt

protection guard.
1
Note: Keep the belt tensioned to prevent the
belts from coming out of the pulley groove,
once the engine has completely stopped,
2
return the tensioner to the relieved position
so as not to strain the belts while not using
the equipment.
Carefully read Operator's Manual, tractor and
cardan instructions manuals. Shredder TR-600T
has been manufactured to be coupled to a tractor
equipped with a hydraulic lift of three universal
connecting points, as shown below.
50
Belt Adjustment
3
4
Cardan assembly
Image for illustrative purposes only
13
www.trapp.com.br
1
1
A
A
B
B
1
1
A
A
B
B