Tabla de contenido
Balanced thread tension
*
Auto-thread
tension
When the thread tension dial is set at AUTO for
automatic thread tension, the green light will be on=
For general sewing, set the tension dial at "A", which
covers a wide range of sewing conditions.
[] Set "A" mark of thread tension dial with the
indication line.
[] Green light on.
[] Display screen shows "AUTO".
Balanced
thread
tension
The ideal straight stitch has threads locked between two
layers of fabric as illustrated,
For zigzag stitch sewing, the needle thread will
appear slightly on the wrong side of the fabric,
(_ Wrong side of fabric
(_) Right side of fabric
(_) Bobbin thread
(_ Needle thread (Top thread_
(_) Between layers
Manual thread
tension
adjustment
You shoud adjust the tension manually if the green light
blinks when selecting a specific stitch.
The recommended
tension setting will be displayed on
the LCD screen.
(D Green light blinks
(_ Recommended tension setting
[] If the top thread is too tight, the bobbin thread
appears on the right side of the fabric.
Turn the thread tension dial to a lower number to loosen
the tension.
[] If the top thread is too loose, the top thread loops on
the underside of the fabric,
Turn the thread tension dial to a higher number to
tighten the tension,
f
k.
f
[]i
\
N
1
[]
@
©
J
44
Tabla de contenido
