Tabla de contenido
Threading
the
Machine
•
Threading
the machine
Raise the presser foot lifter.
Press the Up/Down needle position button as
necessary to raise the thread take-up lever to its highest
position,
(_ Up/Down needle position button
(_ Presser foot lifter
®
[] Draw the thread around the upper thread guide while
holding the thread near the spool.
(_ Hold thread
(_) Upper thread guide
[]
C
[] Then, down around the check spring holder.
@ Check spring holder
f
[]
[] Firmly draw the thread from right to left behind the
take-up lever and into the take-up lever eye.
(_ Thread take-up lever
[]
[] Then down through the lower thread guide.
(_ Lower thread guide
[] Slide the thread behind the needle bar thread guide on
the left. Thread the needle from front to back or use the
needle threader.
(_) Needle bar thread guide
\
f-
[]
7D
[]
4
J
38
Tabla de contenido
