Tabla de contenido
o Drawing up bobbin thread
[]
Raise the presser foot. Hold the needle thread lightly
with your left hand.
[_ Rotate the handwheel counterclockwise,
toward you, for
one complete turn,. Bring the bobbin thread up by pulling
the needle thread up.
[_ Pull both threads 4" to 6" (t0.0 to 150 cm) under and
behind the presser foot.,
%
.-,..
1
Adjust the Needle
Thread Tension
for a Straight
Stitch
= Correct tension
(_ Needle thread (Top thread)
Bobbin thread (Bottom thread)
3(3(®
To loosen
® To tighten
The ideal straight stitch has threads locked between two
layers of fabric, as illustrated (magnified to show detail).
If you look at the top and bottom of a seam, notice that
there are no gaps. Each stitch is smooth and even.,
When adjusting the needle thread tension, the higher the
number, the tighter the needle thread tension°
Results depend on:
- stiffness and thickness of the fabric
- number of fabric layers
- type of stitch
oTension is too tight
(_ Needle thread (Top thread)
(_) Bobbin thread (Bottom thread)
® To loosen
® Right side (Top side) of fabric
(_) Wrong side (Bottom side) of fabric
If the bobbin thread shows through on the right side (Top
side) of the fabric, and the stitch feels bumpy, turn the dial
to a lower tension setting number to loosen the needle
thread tension.
®
®
®
J
.-,.
28
Tabla de contenido
