Tabla de contenido
Extender
Stitch
(_ Stitch pattern: #05, #06 (mode 3)
(_ Thread tension dial: AUTO
(_ Foot: Satin stitch foot F
The patterns #05 and #06 (mode 3) are extender stitches
for programming to connect patterns with straight stitches.
When the extender stitch is programmed after a pattern,
straight stitches will be inserted after the last needle point
of the memorized pattern.
Pattern #05:2 stitch counts
Pattern #06:4 stitch counts
The extender stitches will be the same stitch length as
memorizedpattern.
Example:
Extending pattern #65 (m_
_i: ......
[] Select stitch pattern #65 (mode 3:
[]Pressmemorykey,
::
:: ......
®
'
I 2
IH0 DE 3
I
HODE.J
3-65
3-0_
HODE 3
Im(_
I
Straight
Stitch
insertion
Use patterns #01 to #04 (mode 3) to insert straight stitches
with a constant stitch length (2.5 mm).
Pattern #01 : 3 stitch counts of center needle position
Pattern #02:5 stitch counts of center needle position
Pattern #03:3 stitch counts of left needle position
Pattern #04:5 stitch counts of left needle position
(Z) Inserted stitches
Space
insertion
Memorize pattern #99 (mode 2) after the desired pattern,
and a 5 mm space will be inserted between the patterns.
(_ Space
122
@
I-
@
Tabla de contenido
