Changing Presser Foot; To Remove; To Attach; Presser Foot Types - Kenmore 385.15212 Manual De Instrucciones

Changing Presser Foot
(_) Lever
_)Groove
®Pin
• To remove
Turn the handwheel
toward
you to raise the needle
to its
highest position. Raise the presser foot.
Press the lever (_)on the back of the foot holder. The
presser foot will drop off.
• To attach
Place the presser foot so that the pin _on the foot lines
up directly below the groove _ of the foot holder.
Lower the foot holder to lock the foot in 01ace.
Presser Foot Types
• Zigzag foot
Use this foot for both straight and zigzag stitching
For: Straight stitch (page 34)
Topstitching (page 36)
Basic zigzag (page 42)
Button sewing (page 46)
Overcasting stitch (page 48)
Blind hem stitch (page 50)
Lace work (page 50)
Shell stitch (page 52)
Multiple zigzag stitch (page 52)
* Box stitch (page 54)
Twin needle stitches (page 56)
Straight stretch (page 58)
Rick-rack stretch (page 58)
Overcast stretch stitching (page 60)
Smocking (page 60)
Serging (page 62)
* Elastic stretch stitch (page 62)
* Decorative stretch patterns (page 64)
* Only for model 15616 and 15718
• Automatic buttonhole foot
Use this foot for one step automatic buttonholing.
Simply set a button on the guide of this foot and depress
the foot control. You can sew exactly the same length of
the buttonhole as the button.
For:Automatic buttonhole (page 66)
Corded buttonhole (page 70)
• Zipper foot
The edge of the foot guides the zipper and keeps the
seam straight.
For:Zipper sewing (page 36)
\
f
\
12
%
J
J
J