Idiomas disponibles
Idiomas disponibles
Press either the
automatically.
11.2.3. Selecting stations
Press either the 10/MEM./FOLDER
or repeatedly to select the desired programme position and play the station
stored under it.
The programme position (e.g. P01) is shown on the display.
12. Connecting a microphone
You can connect up to two microphones to the sound system at the same time. One
microphone is included with the device.
Microphones can be used in all operating modes.
To connect a microphone, proceed as follows:
Switch off the sound system.
Connect the microphone to microphone input MIC 1 or MIC 2.
Set the On/Off switch on the microphone to the ON position.
Use the
MIC VOL. controller to set the microphone volume you require.
Press the ECHO button to activate the echo sound effect for the connected
microphones.
Press the ECHO button again to deactivate the echo sound effect for the
connected microphones.
After use, set the On/Off switch on the microphone to the OFF position.
13. Charging an external device via USB
The sound system has one USB port for charging external devices (e.g.
smartphones). Please note the current output voltage at the USB CHARGE port:
5 V
max. 1000 mA
Connect the external device using a USB charging cable (not supplied) to the
USB CHARGE port on the top of the device.
The battery from your external device is now charged.
50
or
button to stop storing the stations
10/MEM./FOLDER button once
or
