Idiomas disponibles
Idiomas disponibles
In this case, increase the playback volume on the external device and re-
establish the connection with the sound system.
Press the
standby mode.
7. Connecting an external playback device
Use the AUX IN jack to establish a connection with an external playback device (for
example a CD player or MP3 player).
Switch off the sound system.
Switch off your external device.
Plug the end of a 3.5 mm jack cable (not supplied with the device) into the AUX
IN jack on the top of the device.
Connect the other end of the cable to your external device.
Switch on your external device.
Switch on the sound system.
Press the
display.
The audio signal from your external device will now be played back.
When signals are being transmitted via a cable, it is not possible to
control all operating functions using the buttons on the sound system.
In this case, you have to rely on the controls on your external device.
8. Inserting USB memory devices
If necessary, remove the protective cap and insert the USB memory device into
the USB port on the top of the device.
Press the
display.
Observe the following instructions regarding usable USB storage devices:
•
As there are numerous different file systems and file formats, the connected
storage media cannot be guaranteed to function.
•
Depending on the size of the data medium, it may take some time for the
system to be detected.
•
USB storage devices with a maximum memory capacity of up to 32 GB are
supported.
•
Supported file systems are FAT16 and FAT32. The supported file format is MP3.
•
External hard disks are not supported.
•
USB extension cables are not supported.
button to switch the sound system back on from automatic
button once or several times until AUX is shown on the
button once or several times until USB is shown on the
DE
EN
FR
NL
IT
ES
45
