Idiomas disponibles
Idiomas disponibles
NOTICE!
Risk of damage!
The device may be damaged if the mains plug is
plugged in loosely during operation. Only operate the
device with the mains plug fully plugged in.
Before operating the party sound system from the
mains, make sure that the mains plug is fully inserted
into the connection socket (AC 100–240 ~ 50/60Hz).
6.4. Internal rechargeable battery
As soon as the sound system is connected to a power socket, the built-
in rechargeable battery begins charging automatically. The CHARGE LED
continuously lights up red during charging.
When charging is complete and the internal built-in battery is fully charged, the
CHARGE LED continuously lights up green.
If the battery charge level is too low, the CHARGE LED flashes red.
The rechargeable battery is an integral component of the device and
users must not repair or replace it themselves.
6.5. Switching the device on/off
Shift the On/Off switch to the ON position to switch on the device.
The display lights up.
Shift the On/Off switch to the OFF position to switch off the device.
The display turns off.
Even when switched off, the internal battery is charged until it is fully charged.
As long as the sound system is connected to the power supply, it continues to
consume a small amount of power even when the battery is fully charged.
Disconnect the device from the power supply to switch it off completely.
If the device receives no signal in Bluetooth®/USB/AUX mode for 15
minutes, it automatically switches to standby mode.
Press the
automatic standby mode.
If the playback volume on the external device is set too low, the sound
system may receive insufficient audio signal and automatically switches
to standby mode.
44
button to switch the sound system back on from
