Idiomas disponibles
Idiomas disponibles
We also recommend setting the volume on your audio output device to maximum,
and fine-tuning the volume on the sound system.
To disconnect an existing Bluetooth connection, press and hold the
button.
A signal tone sounds and the Bluetooth LED PAIR flashes blue quickly. The sound
system is now in search mode again and you can perform a new device pairing.
10. Operation
10.1. Adjusting the volume
Turn the volume controller
towards , to reduce the volume.
Immediately after being switched on, the sound system always starts at
the set volume regardless of the last volume setting.
10.2. Super bass
Press the SUPER BASS button to enhance low frequencies and switch on bass
amplification.
BASS is shown on the display.
Press the SUPER BASS button again to switch off bass amplification.
BASS disappears from the display.
10.3. Equaliser
Press the EQ button once or several times to activate one of the preset equaliser
settings (FLAT, CLASSIC, ROCK, POP or JAZZ).
The selected equaliser setting is then shown on the display.
10.4. Party light eff ect
Press the LIGHT button once or several times to activate preset party light effect
L-1 to L-5.
Press the LIGHT button several times until LOFF is shown on the display to
deactivate all party light effects.
Press and hold the LIGHT button for approx. 2 seconds to switch on the lighting
around the volume controller and the side LED light.
To switch off lighting around the volume controller and the side LED light, press
and hold the LIGHT button again for approx. 2 seconds.
VOL.
towards
to increase the volume, or
DE
EN
FR
NL
IT
ES
47
