11.5. Entering a network key
If you have skipped the WPS menu, you must enter the network key.
Enter the network key for the WLAN access point using the number/character
buttons on the remote control
Alternatively:
Enter the network key using the NAV/OK dial on the device:
The dial has a push-button function (OK button).
To do so, use the dial to select a character and press the OK button to confirm.
To delete a character, select BKSP and press the OK button.
If you want to discard the entry, select CANCEL and then press the OK button.
Once you have entered the network key, select OK and then press the OK
button to confirm.
The device stores this key so that it does not need to be re-entered to re-establish
the connection.
The device will now establish a connection with the network. Once the connection
is successful, a corresponding notice is then displayed.
Press OK on the remote control or the OK dial on the device to confirm.
The device can now play back media via the network and receive internet radio
stations as long as there is an active internet connection via the network.
12. Listening to internet radio
You can play INTERNET RADIO stations using the internet radio operating
mode. The internet radio must be connected with your network according to the
description from section ("11.3. Establishing a connection to a network" on page
342) and there must be an active internet connection for this.
Press the MODE button on the device or
main menu.
To listen to internet radio, select INTERNET RADIO in the main menu and
confirm with OK on the remote control or press the MODE button on the
device and use the NAV/OK dial to select INTERNET RADIO and press the
OK button.
The description for opening the main menu and selecting the operating
mode applies to all operating modes.
In addition to the menu entries, there are two additional entries in the first display:
LAST LISTENED: calls up the most recently played internet radio stations and
podcasts.
344
on the remote control to open the