Dräger Air Guard 6500 Instrucciones De Uso página 31

Operating pressure
HP

LP

Relative humidity
Intake air and ambient air Free of ammonia or ammonium
Power intake
Volume of the audible
warning
Data on potential-free contact:
Cable bushing
Maximum possible
conductor cross-section
on contact
Maximum permissible
switching current
Maximum permissible
switching voltage
Sensor measuring range
CO
CO
2
O
2
VOC
Dew point
H S (optional)
2
The measurement accuracy of the sensors can be found in the
relevant instructions for use for the sensors.
10 Order list
Designation
DrägerSensor CO
DrägerSensor O LS
2
DrägerSensor H S
2
50 ppm CO test gas
500 ppm CO test gas
2
20.9 % O test gas
2
5 ppm isobutylene test gas
15 ppm H S test gas
2
99.999 % N test gas
2
Dräger-Tubes activated carbon type G
(pack of 10 for gas treatment)
PS 200 to 330 bar
PS 6 to 10 bar
40 to 90 %, non-condensing
compounds
2.2 to max. 4.4 A
83 dB (at a distance of 10 cm)
M 16x1.5 screw connection
(approx. 7 to 10 mm clamp/seal
zone)
2.5 mm²
6 A
250 VAC or 30 VDC
0 to 50 ppm
0 to 2000 ppm
0 to 25 Vol%
0 to 1.6 mg/m³
0 to 5000 ppm
0 to 15 ppm
Order number
68 09 605
68 09 630
68 09 610
68 11 117
68 12 383
68 13 239
68 13 685
68 14 199
68 10 394
67 28 831
11 Markings
CAUTION
Do not remove or modify the safety markings on the product.
► Damaged or missing safety markings should be replaced
immediately with markings matching the originals.
11.1 Name plate
The name plate is located on the product (sample illustration).
12 Declaration of Conformity
Order list en
31