Idiomas disponibles
Idiomas disponibles
ENG ORIGINAL INSTRUCTIONS
ute. Damaged accessories will normally break apart
during this test time. Position the cord clear of the
spinning accessory. If you lose control, the cord may
be cut or snagged and your hand or arm may be
pulled into the spinning accessory. Regularly clean
this power tool's air vents. The motor's fan will draw
the dust inside the housing and excessive accumula-
tion of powdered metal may cause electrical hazards.
STORE POWER TOOLS.
Store power tools out of reach of children and not
allow the handling of power tools to people unfami-
liar with the tools or these instructions. Power tools
are dangerous in the hands of untrained users.
MAINTENANCE.
Check moving parts for misalignment or binding, there
are no broken parts or other conditions that may affect
the operation of power tools. Power tools are repaired
before use when they are damaged. Many accidents
are caused by poorly maintained power tools. Use
power tools, accessories and tool tips, etc. according
to these instructions and in the manner provided for
the particular type of power tool, taking into account
the conditions work and work to develop. The use of
the power tool for applications other than those inten-
ded could result in a dangerous situation. Please check
your power tool serviced by a Werku
service using only identical replacement parts. This will
ensure the safety of the power tool is maintained.
CHECK THE GOOD CONDITION OF THE HOIST.
Make sure that all the screws in the hoist are per-
fectly tightened. In cold climates or when the hoist
has not been used for a period, allow the hoist to
warm up by leaving it to run empty for a few minutes,
to ensure that all internal components are perfectly
lubricated. Make sure that the possible installed ac-
cessories are perfectly fitted in place.
BEFORE STARTING WORK.
Make sure that the hoist is firmly supported before
using. Check that no one is standing beneath you
when using the hoist in high areas. Keep your hands
away from all moving parts of the hoist.
DURING THE OPERATION.
Do not leave the hoist operating without having it firmly
fixed. Only turn it on when you are sure you have full
control over it. Do not point the hoist at anyone while in
use. When operating the hoist will produce vibrations.
The screws may gradually come loose, and possibly
cause faults or accidents. Keep your hands away from
all moving parts of the hoist.
AT FINISH WORKING.
Do not touch the possible accessories installed in
the hoist after use. It may be hot and cause burns.
Some materials worked with may contain chemi-
cals or toxic components. Avoid inhaling these
substances or allowing them to come into contact
with your skin. Use PPE designed to prevent and
protect against incidents of this kind.
DESCRIPTION OF THE PRODUCT.
The hoist has been designed to carry out jobs of ver-
tical elevation. Refer to this plan to familiarize your-
self with the hoist before use.
3
official repair
®
1
1. Hook.
2. End race lever.
3. Cable.
4. Supports.
5. Motor.
6. Control.
7. Switch.
8. Safety button.
9. Download limit device.
USE INSTRUCTIONS.
Before starting up the hoist, we recommend that
you carefully read all of the instructions as indicated.
Please respect all regulations regarding the preven-
tion of accidents, health and safety directives, laws
and applicable restrictions for work places. The
hoist must only be used by persons who have been
instructed in its use and only for the purposes for
which it has been designed.
POWER SUPPLY.
Make sure the power supply is adapted to the re-
quirements shown on the information panel of the
hoist (1). Using the motor at low voltage will make
4
English
4
2
9
5
8
7
6
