WERKU WK400220 Instrucciones Originales página 2

ENG ORIGINAL INSTRUCTIONS
CE DECLARATION CONFORMITY.
Werku ® declares that the WK400220 hoist is in ac-
cordance with the following European Directives
and Standards:
2006/42/CE
2006/95/CE
2004/108/CE
EN14492-2:2006+A1
EN60204-32:1998
EN55014-1:2006
EN55014-2:1997+A1
EN61000-3-2:2006
EN61000-3-3:1995+A1+A2
La Coruña, 04/01/2022
R Yáñez
Werku Tools SA
TECHNICAL CHARACTERISTICS.
Voltage-frequency .............................. 230V~50Hz
Power ......................................................... 1050W
Class .................................................................. II
Protection index ........................................... IP54
Speed rate .................................................. 2500 min
Lifting capacity ................................... 300-600 kg
Lifting speed ......................................... 10-5 mpm
Lifting height ............................................ 22-11 m
Cable capacity ...................................... > 1600 kg
Cable length ................................................. 22 m
Cable diameter ......................................... 4.5 mm
Net weight ................................................... 18 kg
Acoustic pressure LpA ...................... 70.0 dB(A)
Respective uncertainity KpA .................... 3 dB(A)
Acoustic pressure LwA ..................... 80.0 dB(A)
Respective uncertainity KwA .................... 3 dB(A)
Vibration Ah .........................................
Respective uncertainity Kh ....................... 1.5 m/s²
VIBRATION.
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one power tool with another. The
declared vibration total value may also be used in a
preliminary assessment of exposure. Warning: vibra-
tion emission during actual use of the power tool can
differ from the declared total value depending on the
ways in which the power tool is used. Warning: identify
safety measures to protect the operator, based on an
estimation of exposure in the actual conditions of use.
PICTOGRAMS.
Double insulation
SAFETY INSTRUCTIONS.
-1
This power tool is intended to function as a hoist. Read
all safety warnings, instructions, illustrations and spe-
cifications provided with this power tool. Failure to fo-
llow all instructions listed below may result in electric
shock, fire and/or serious injury. Keep all warnings
and all instructions for future reference. Accidents can
be avoided in many cases by recognizing a potentially
hazardous situation before it occurs and by observing
appropriate safety procedures. Operations, such as
grinding, wire brushing, polishing or cutting-off are not
recommended to be performed with this power tool.
Operations for which this power tool was not designed
may create a hazard and cause personal injury.
2.5 m/s²
WORK AREA SAFETY.
Keep work area clean and well lit. Cluttered and
dark areas invite accidents. Do not operate this
power tool near flammable materials. Sparks could
ignite these materials. Keep away from children and
curious while operating a power tool. Distractions
can cause you to lose control. Keep bystanders a
safe distance away from work area. Anyone ente-
ring the work area must wear personal protective
equipment. Fragments of work piece or of a broken
accessory may fly away and cause injury beyond
immediate area of operation.
2
English
Wear eye protection
Wear feet protection
Wear head protection
Wear hand protection
Read instruction manual
European conformity
TÜV Rheinland-GS certification
2002/96/CE directive