Idiomas disponibles
Idiomas disponibles
11.2. Stopping the alarm/activating the snooze
function
When the alarm sounds, you can
press
to deactivate it until the next alarm time
or press the button to start the snooze function for 9 minutes. If the snooze
function is active, the remaining time is shown on the display. To stop the
snooze function before the time has elapsed, press
til the next alarm time.
11.2.1. Activating/deactivating the alarm
Press and hold the TIMER button for a few seconds. ALARM 1 SETUP is shown
on the display.
Press the TIMER again to select the required ALARM 1 or ALARM 2.
Use the or buttons to switch the alarm time on/off and press the but-
ton to confirm.
If an alarm is switched on, the alarm time is shown next to the respective alarm sym-
bol. If the alarm is switched off, OFF is shown in this position.
12. Playing back CDs and USB storage media
When the device is switched on, press the SOURCE button on the remote con-
trol or the
button on the device
Use or to select the required source until CD or USB is highlighted on the
display.
Press to confirm.
12.1. Notes on the media
USB memory sticks can be connected to the USB port. Note the following:
•
Due to the numerous different file systems and file formats, connected USB
memory sticks cannot be guaranteed to function.
•
Depending on the size of the data medium, it may take some time for the sys-
tem to be detected.
•
Supported file systems are FAT16 and FAT32. The supported file format is MP3.
•
Depending on the medium, certain functions may not be supported. For exam-
ple, on an audio CD you might not be able to select a track or the track informa-
tion.
•
External hard disks are not supported.
to deactivate the alarm un-
DE
EN
FR
ES
IT
NL
61
