Idiomas disponibles
Idiomas disponibles
12.2. Track information (ID3)
If the CD or the USB memory stick contains tracks with ID3 information, press INFO
while a track is playing to display this information about the tracks one after the
other. You will see the track, artist and album name on the display.
12.3. Inserting/removing a disc
Ensure there is approximately 15 cm of space in front of the device so that the CD
can be ejected easily.
When the device is switched on, open the CD tray by pressing the
Always place a CD in the disc tray with the labelled side facing upwards.
Press the
button to close the disc tray.
READING will appear on the display.
The total number of tracks on the CD and the total running time are displayed. The
first track then starts playing automatically.
If no disc is inserted, or if the disc cannot be read, NO DISC is shown on the display.
Press the
button to eject the CD again. OPEN appears on the display and the
CD is ejected.
12.4. Inserting USB memory sticks
Insert the USB memory stick into the USB port.
The tracks are read, and the display shows the total number of albums and
tracks in stop mode.
12.5. Starting/stopping playback
Press the button to start playing tracks. To pause playback, press the but-
ton again. Press the button again to resume playback.
12.6. Track selection, fast rewind/forward
Press the button to go back to the start of the track that is currently being
played. Press the button again to skip to the previous track. Use the button to
skip to the next track.
Hold down the button to fast rewind within a track or hold down the but-
ton to fast forward.
12.7. Folder selection
If you are playing MP3 files, you can store them in different folders to make it easier
to keep an overview of the tracks.
Press either the FOLD or FOLD+ button to change folder on an MP3 data medi-
um.
62
button.
