KNF N952KTE-W Manual De Instrucciones página 83

Diaphragm pump N952KTE-W N952KT.29E-W
Fastening the
connection ca-
bles
Translation of Original Operating and Installation Instruction, KNF 339866-336533
02/23
à
Make sure that the installation location allows access for
periodic maintenance and inspection.
The IP protection class of the pump motor is specified on
the type plate.
à
Install the pump at the highest point in the system to pre-
vent condensation from collecting in the pump head.
à
Protect the pump from dust.
à
Protect the pump from vibration and impact.
6.2 Electrical connection
DANGER
à
When connecting to a power source, observe the applica-
ble standards, regulations, directives, and technical stan-
dards.
Refer to the type plate for the maximum current con-
sumption of the pump.
à
Install an Emergency Off device such that it is not possi-
ble for there to be an automatic restart or for hazardous
situations to persons and property to occur.
à
Install the pumps in such a way that it is not possible to
touch electrically live parts (electrical connection).
à
Fasten the connection cables so that
à
the cables do not come into contact with movable or
hot parts.
à
the cables cannot be worn or damaged on sharp cor-
ners or edges
Danger to life from electric shock
à
Only have the pump connected by
an authorized specialist.
à
Only have the pump connected if
the power supply is disconnected.
Installation and connection
DE
EN
FR
ES
IT
23