KNF N952KTE-W Manual De Instrucciones página 109

Diaphragm pump N952KTE-W N952KT.29E-W
Translation of Original Operating and Installation Instruction, KNF 339866-336533
02/23
2. Make sure that the hose connection is secure by pulling
gently on the hose.
3. Properly dispose of replaced diaphragms, valve plates
and O-rings.
Final steps
1. Mount the pump housing parts (2/Fig. 6, 4, 6 and 8) on
the pump and tighten screws (1/Fig. 6, 3, 5 and 7).
2. Reconnect the suction and pressure line to the pump.
3. Connect the pump to the power supply.
If you have questions with regard to maintenance, please
contact your KNF Customer Service (for contact data, visit
www.knf.com).
To ensure the required gas tightness of the pump follow-
ing servicing, a leak test is to be performed.
WARNING
Risk of injury and poisoning from leaks
à
Before recommissioning the
pump, check the pump heads and
pneumatic connections for leaks.
Leaks may lead to poisoning,
chemical burns or similar injuries.
Servicing
DE
EN
FR
ES
IT
49