KNF N952KTE-W Manual De Instrucciones página 81

Diaphragm pump N952KTE-W N952KT.29E-W
Mounting dimen-
sions
Translation of Original Operating and Installation Instruction, KNF 339866-336533
02/23
6 Installation and connection
Only install the pumps in accordance with the operating pa-
rameters and conditions described in Chapter 3 Technical
data [} 14].
à
Observe the safety instructions (see Chapter Safety).
DANGER
6.1 Installing the pump
à
Store the pump at the installation site to allow it to adapt
to the ambient temperature before installation (condensa-
tion must not be allowed to form).
à
Select a secure location (flat surface) for the pump.
à
For mounting dimensions, see the following figures:
Risk of dangerous gas mixtures during
pump operation
Depending on the medium being trans-
ferred, breakage of the media-contact-
ing components can result in a danger-
ous mixture if the medium mixes with
the air in the compressor housing or
the surroundings.
à
Before using a medium, check the
compatibility of the media-con-
tacting components (see 3 Tech-
nical data [} 14]) with the
medium.
Installation and connection
DE
EN
FR
ES
IT
21