Danger Of Explosion; Personal Protective Equipment; General Information; Safety Notices And Their Meaning - Hilti DX E-72 Manual De Instrucciones

Ocultar thumbs Ver también para DX E-72:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 69

1.1.8 Danger of explosion

a) Use only cartridges of a type approved for use
with the tool.
b) Never use force when attempting to remove un-
used cartridges from the tool.

2 General information

2.1 Safety notices and their meaning

DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation that
could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation that
could lead to slight personal injury or damage to the
equipment or other property.
NOTE
Draws attention to an instruction or other useful informa-
tion.
2.2 Explanation of the pictograms and other
information
Warning signs
General
Warning:
warning
explosive
substances

3 Description

3.1 Use of the product as directed
The tool is designed for professional use in fastening applications where nails, threaded studs and composite fasteners
are driven into concrete, steel and sand-lime block masonry.
The tool is for hand-held use only.
Modification of the tool is not permissible.
The tool may not be used in an explosive or flammable atmosphere unless it has been approved for use under these
conditions.
To avoid the risk of injury use only genuine Hilti fasteners, cartridges, accessories and spare parts or those of
equivalent quality.
Observe the information printed in the operating instructions concerning operation, care and maintenance.
Printed: 14.04.2014 | Doc-Nr: PUB / 5069866 / 000 / 03
All manuals and user guides at all-guides.com
Warning: hot
surface
c) Store unused cartridges in a locked place where
they are not exposed to dampness or excessively
high temperatures.

1.1.9 Personal protective equipment

The user and any other persons in the vicinity must
wear suitable eye protection, a hard hat and ear
protection while the tool is in use or when remedying
a problem with the tool.
Obligation signs
Wear eye
Wear a hard
protection
hat
Location of identification data on the tool
The type designation and serial number can be found on
the type identification plate on the tool. Make a note of
this data in your operating instructions and always refer
to it when making an enquiry to your Hilti representative
or service department.
Type:
Generation: 01
Serial no.:
Wear ear
Read the
protection
operating
instructions
before use.
19
en
Tabla de contenido
loading

Tabla de contenido