Confirmation Of Cip Testing; Health And Safety Of The Operator; Noise Information - Hilti DX E-72 Manual De Instrucciones

14 Confirmation of CIP testing

The following applies to C.I.P. member states outside
the EU and EFTA judicial area: The Hilti DX E-72 has
been system and type tested. As a result, the tool bears
the rectangular PTB approval mark showing approval
number S 832. Hilti thus guarantees compliance with the

15 Health and safety of the operator

15.1 Noise information

Powder-actuated fastening tool
Type
Model
Caliber
Power regulation
Application
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Noise (power) level, L
WA, 1S
Emission noise-pressure level in the work station,
L 2
pA, 1s
Peak sound pressure emission level, L
1 ± 2 dB (A)
2 ± 2 dB (A)
3 ± 2 dB (C)
Operation and set-up conditions: Set-up and operation of the pin driver in accordance with E DIN EN 15895-1 in the
semi-anechoic test room of Müller-BBM GmbH. The ambient conditions in the test room conform to DIN EN ISO 3745.
Testing procedure: Enveloping surface method in anechoic room on reflective surface area in accordance with
E DIN EN 15895, DIN EN ISO 3745 and DIN EN ISO 11201.
NOTE The noise emissions measured and the associated measurement uncertainty represent the upper limit for the
noise values to be expected during the measurements.
Variations in operating conditions may cause deviations from these emission values.
15.2 Vibration
Total vibration in accordance with 2006/42/EC does not
exceed 2.5 m/s².
Printed: 14.04.2014 | Doc-Nr: PUB / 5069866 / 000 / 03
All manuals and user guides at all-guides.com
1
3
pC, peak
approved type. Unacceptable defects or deficiencies,
etc. determined during use of the tool must be repor-
ted to the person responsible at the approval authority
(PTB) and to the Office of the Permanent International
Commission (C.I.P.).
DX E‑72
Series
5.6/16 yellow
The tool has no power regulation feature.
Fastening 20 mm laminated wood to concrete (C40)
with the X-U47 P8
115 dB (A)
107 dB (A)
141 dB (C)
Further information about user health and safety can be
found at www.hilti.com/hse.
en
31