Components; Control Panel Components - Westinghouse WGen3600DFc Manual De Instrucciones

COMPONENTS

COMPONENTS

CONTROL PANEL COMPONENTS

1
1. Fuel Selector Switch: Used to select gas or propane
operation.
2. Push-Button START/STOP:
automatically start the engine. Push again to stop
the engine.
3. Battery Switch: Turns battery ON and OFF. Must be
ON before electric or remote start.
4. Battery Indicator: Indicates that power is ON. Light
will remain illuminated while the unit is ON.
5. 30 Amp AC Circuit Breaker: Circuit breaker limits
the current that can be delivered through the NEMA
L5-30R and TT-30R receptacles to 30 Amps.
6. 120 Volt AC, 20 Amp Duplex NEMA 5-20R
Receptacles: Receptacles can supply a maximum of
20 Amps.
10 | Westinghouse Outdoor Power Equipment, LLC
2 3
4
11 10
12
7.
Push once to
8.
9.
10. Battery Charging Port: Used to charge the battery
11. Ground Terminal: The ground terminal is used to
12. CO Sensor indicator lights: The CO Sensor
5 6 7 7
9
20 Amp AC Circuit Breaker: Circuit breaker limits
the current that can be delivered through the NEMA
5-20R receptacles to 20 Amps.
30 Amp AC Circuit Breaker: Circuit breaker limits
the current that can be delivered through the NEMA
L5-30R and TT-30R receptacles to 30 Amps.
120 Volt AC, 30 Amp NEMA TT-30R Receptacle:
Receptacle can supply a maximum of 30 Amps.
with the included battery charger.
externally ground the generator.
monitors for the accumulation of poisonous carbon
monoxide gas. If increasing levels of CO gas are
detected, the CO Sensor automatically shuts down
the engine.
7 8