Overview: Standard Display - Nouvag MD 30 Instrucciones De Uso

MD 30
7.3

Overview: standard display

A
B
C
D
E
F
A) Information Line
Information and error messages are displayed here.
B) Program
Shows selected number of program for the active motor.
C) Pump
The numerical value shows the pump flow rate in percent and the drop symbol together with the
on/off indication shows the if the pump is in stand-by mode or switched off.
D) Rotational direction of the motor
The arrow indicates the rotational direction set for the motor. The rotation direction can be changed
by pressing the button "
panel.
E) AS/AL
Indication of the Auto Stopper (AS) mode or the Automatic Limiter (AL) mode
(see chapter "7.5 Torque limit function, AL mode" and chapter "7.6 Torque limit function, AS mode").
F) Current speed
Shows current revolutions per minute of the motor.
G) Clock
H) Date
I) Motor
Shows selected motor → see also the green indicator light beside the motor sockets.
J) Name of the handpiece or corresponding transmission ratio
Shows name of the handpiece used or the selected transmission ratio. (See also 7.4.1, "Selecting the
contra angle or transmission ratio")
K) Speed range
Shows speed range of the handpiece used.
L) Maximum torque
Shows maximum torque setting.
M) Current torque
Bar graph providing a graphical representation of the current torque. All bars active means max.
torque reached.
The pump does not begin to operate until the motor has been activated by pressing the pedal.
MD 30 Operating Instructions, Art. No. 31686, V45/12
All manuals and user guides at all-guides.com
" on the pedal or by long pressing of the "Motor 1/2" key at the operating
G
H
I
EN
J
K
L
M
11