Assembly Of Internal And External Irrigation System (Optional) - Nouvag MD 30 Instrucciones De Uso

MD 30
6.5

Assembly of internal and external irrigation system (optional)

A B
Art. No.: 1777
C
C Art. No.: 1873
D
D
E F
G
MD 30 Operating Instructions, Art. No. 31686, V45/12
All manuals and user guides at all-guides.com
A) Graft a 6 cm tube piece (optional, Art. No.: 1773) on
Art. No.: 1712
C
B) Connect one of the 6 cm tube pieces that branch out
Art. No.: 1881
C) Secure small, grey clips and the bigger, white clips to
D) Secure bigger, white clips to the contra angle and the
E) Put the internal cooling tube with attached tube piece
F) Push the spigot of the cooling tube into the hole in
G) Connect the 6 cm tube piece (optional, Art. No.: 1773)
H) If needed, secure further clips to the cable of the
each of the branching tubes of the Y-Connector
(optional, Art. No.: 1777).
of the Y-Connector with the internal cooling tube
(delivered with the contra angle, or optional, Art. No.:
1712).
the tube set.
small, grey clips to the motor cable.
into the hole in the head of the contra angle (special
drill bits are necessary with a hole for internal
cooling).
the shank of the clamping mechanism.
with the tube of the external cooling.
motor or the contra angle.
EN
9