9. Operation
9.1. Switch the device on/off
Press the
button to switch on the device.
Press the
button again to switch the device into standby mode.
The device uses a small amount of electricity, even when it is switched
off. To completely switch off the device, unplug the mains adapter from
the power supply.
9.2. Switching the display lighting on/off
Press the
the radio display lighting on or off.
9.3. Switch LED light strip on/off
There is an LED light strip on the underside of the radio.
Press and hold the
the remote control to switch the LED light strip on or off.
The LED light strip switches off automatically after a period of 120
minutes.
This light is only designed for selective, supporting lighting for the
presentation of foodstuffs and is not intended to be room lighting.
9.4. Setting the volume/muting the device
Use the controller or the VOL+ / VOL buttons on the remote control to set the
desired volume.
In radio or AUX mode, press the controller or the
control to mute the radio.
MUTE flashes on the display for as long as the device is muted.
Press the controller or the
unmute.
9.5. Equaliser
The radio has pre-installed equaliser settings (NOR, FLAT, ROCK, CLSC, POP,
JAZZ, BASS). It is possible to select an equaliser setting in any operating mode.
Press the EQ/AOT button or the EQ button on the remote control several times
to select an equaliser setting.
60
button or the DIM button on the remote control to switch
button on the radio or press the
button on the remote control again to
button on
button on the remote