10. Basic settings
The radio must be in standby mode to carry out the different settings.
Press and hold the
the remote control to open the settings menu.
Turn the controller or press one of the
control to select one of the following settings options:
•
Time Set (set time)
•
Date Set (set date)
•
CT Update (automatic time synchronisation on/off )
•
DT (dimmer timer function on/off )
•
12H/24H
(time format)
If no button is activated in the settings menu within 10 seconds, the
menu is automatically closed. Settings made up to this point are saved.
You must go through all the menu settings again to make any further
changes.
10.1. Setting the time manually
In the settings menu, select the TIME SET subitem and confirm your selection
by pressing the controller or the
The hour indicator flashes on the display.
Use the controller or the
current hour.
Press the controller or the
your entries.
The minute indicator flashes on the display.
Use the controller or the VOL+ / VOL buttons on the remote control to set the
current minutes.
Press the controller or the
settings.
10.2. Setting the date manually
In the settings menu, select the DATE SET subitem and confirm your selection
by pressing the controller or the
The year indicator flashes on the display.
Use the controller or the
current year.
Press the controller or the
your entries.
The month indicator flashes on the display.
Proceed as previously described to set the current month and day.
64
SET/MEM./AMS
VOL+ / VOL
button on the remote control to confirm
button on the remote control to save your
VOL+ / VOL
button on the remote control to confirm
button or press the
VOL+ / VOL
buttons on the remote
button on the remote control.
buttons on the remote control to set the
button on the remote control.
buttons on the remote control to set the
TIME SET
button on