Connecting Inverter Cables; Important - Schumacher Electric PI-1000 Manual Del Propietário

procedure is not successful, it is likely that the inverter
does not have the required capacity to operate the de-
vice in question.
6.

CONNECTING INVERTER CAbLES

The inverter and power source must be in the OFF
mode.
IMPORTANT: Make sure you connect your inverter to a
12-volt power supply only.
1. Locate the Positive and Negative plastic terminals
located on the left side of the inverter. Using a stan-
dard (flathead) screwdriver, unscrew the positive (red)
and negative (black) terminal screws just enough to
be able to insert the bare end of the connector cables.
2. Insert the bare end of the positive (red) cable into
the positive (red) terminal. Insert the bare end of the
negative (black) cable into the negative (black) ter-
minal. Tighten each terminal screw so that the cable
cannot come loose.
CONNECTING INVERTER CAbLES TO 12V bATTERY
OR 12V POWER SOURCE:
1. Keep hands, hair, clothing and jewelry clear of bat-
tery terminals.
2. Wear eye protection and clothing protection.
3. Connect the negative (black) inverter terminal cable
to the power source negative (-) or battery terminal.
Make sure the connection is secure.
4. Connect the positive (red) inverter terminal cable
to the power source positive (+) or battery terminal.
Make sure the connection is secure.
All manuals and user guides at all-guides.com
• 10 •