Operating Instructions - Schumacher Electric PI-1000 Manual Del Propietário

4. Plug a nightlight (with an ON/OFF switch) or other
device (such as a lamp) into the GFCI receptacle and
turn the device "ON".
5. Push the "Test" button located on the GFCI recep-
tacle. The nightlight or other device should go "OFF".
6. Push the "Reset" button and the light or other de-
vice should go "ON" again.
NOTE: If the light or other device remains "ON" when the
"Test" button is pushed, the GFCI is not working properly
and should not be used. Call Customer Service.
8.

OPERATING INSTRUCTIONS

1. Connect the inverter (see "CONNECTING INVERT-
ER CABLES" section.
2. Switch the inverter switch to the ON (I) position.
3. The LED indicator light should glow GREEN verify-
ing the inverter is receiving power.
4. Turn the inverter rocker switch to the OFF (O) posi-
tion. (The GREEN LED power indicator light may flash
briefly and/or the internal speaker may make a brief
"beep". This is normal.).
5. Make sure the device to be operated is turned OFF.
6. Plug the device into the inverter AC outlet.
7. Turn the inverter on.
8. Turn the device on.
9. To disconnect, reverse the above procedure.
All manuals and user guides at all-guides.com
• 12 •