Limited Warranty - ResMed Stellar Serie Manual Del Usuario

Ventiladores no invasivos/invasivos
Ocultar thumbs Ver también para Stellar Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 118
Under normal or single fault conditions the entire pneumatic flow path can become
contaminated with body fluids or expired gases, if bacterial/viral filters are not installed on the
ventilator outlet.
The device has not been tested or certified for use in the vicinity of X-ray, CT or MRI equipment.
The device must not be used in the vicinity of an MRI device. Never bring the device into an MR
environment.
1
Ports may be incorporated into the mask or in connectors that are near the mask.
2
During partial (below rated minimum voltage) or total power failure, therapy pressures will not be
delivered. When power is restored, operation can proceed with no change to settings.
CAUTION
A caution explains special measures for the safe and effective use of the device.
When using accessories, read the manufacturer's User Manual. For consumables, important
information can be provided on the packaging, refer also to Symbols (see page 32).
At low pressures, the flow through the mask vent holes may be inadequate to clear all exhaled
gas, and some rebreathing may occur.
The device may not be exposed to excessive force.
If the device should fall accidentally on the ground, please contact your authorised service agent
and/or healthcare provider.
Pay attention to leaks and other unusual sounds. If there is a problem, contact an authorised
service agent and/or healthcare provider.
Do not replace any parts in the breathing circuit while the device is in operation. Stop operation
before changing parts.
Notes:
A note advises to special product features.
The above are general warnings and cautions. Further specific warnings, cautions and notes appear
next to the relevant instructions in this guide.
Position the device ensuring the power cord can be easily removed from the power outlet.
Only trained and authorised personnel are allowed to make clinical setting changes.
For any serious incidents that occur in relation to this device, these should be reported to ResMed and
the competent authority in your country.

Limited warranty

ResMed Pty Ltd (hereafter 'ResMed') warrants that your ResMed product shall be free from defects in
material and workmanship from the date of purchase for the period specified below.
Product
Mask systems (including mask frame, cushion, headgear and tubing)—excluding single-
use devices
Accessories—excluding single-use devices
Flex-type finger pulse sensors
Humidifier water tubs
Batteries for use in ResMed internal and external battery systems
Clip-type finger pulse sensors
CPAP and bilevel device data modules
Oximeters and CPAP and bilevel device oximeter adapters
Humidifiers and humidifier cleanable water tubs
Titration control devices
34
Warranty period
90 days
6 months
1 year
Tabla de contenido
loading

Tabla de contenido