Engine Maintenance; Draining The Gear Box Oil; Refilling The Gear Box With Oil; Emptying The Carburetor Float Chamber - SHERCO 125 SE RACING Manual Del Proprietário

ENGINE MAINTENANCE

DRAINING THE GEAR BOX OIL

2

REFILLING THE GEAR BOX WITH OIL

Emptying the carburetor float chamber

1
- Remove the engine guard ( p.123).
- When draining the oil the engine should be warm.
WARNING
Use protective gloves.
1
- Position the motorcycle upright on a level surface.
- Place a container under the bike to catch the old oil.
- Remove the drain plug
- Remove the drain plug
- Allow the oil to drain.
- Clean the drain plugs
- Install the drain plug
3
Drain plug
- Remove the engine oil filler cap
- Fill the engine with oil.
Motor oil
- Installe the gear box filler cap
- Install the engine guard.
WARNING
To protect the environment, oil, oil filters and used material must be
deposited in a collection center and not down drain or in the wild.
- Turn handle of fuel tap to the OFF position.
- Place a cloth beneath the carburetor to soak up
emerging fuel.
- Remove plug
- Completely drain the fuel.
- Mount and tighten the plug.
.
1
.
2
and with a degreaser.
1 2
and with a new gasket.
1 2
& M16
1 2
.
3
0,5l
.
3
.
1
15Nm
SAE 5W40
109