Tabla de contenido
Operating Instructions
Manufacturer:
Scheppach Maschinenfabrik GmbH & Co. KG
D-89335 Ichenhausen/FRG
General notes
•
After unpacking, check all parts for any transport darnage. Inform
the supplier immediately of any faults.
•
Later complaints cannot be considered.
•
Make sure the delivery is complete.
•
Before putting into operation, familiarize yourself with the machine
by carefully reading these instructions.
•
Use onIy original accessories, wearing or replacement parts. You
can find replacement parts at your dealer.
•
When ordering, include our item number and the type and year
of construction of the machine.
Dear customer,
We wish you much pleasure and success with your new
machine.
NOTE:
In accordance with valid product liability laws, the manufacturer of this
device shall not be responsible for damage to and from this device
which results from:
•
Improper care.
•
Noncompliance with the Operating Instructions.
•
Repairs made by unauthorized persons.
•
The installation and use of any parts which are not original
replacement parts.
•
Improper use and application.
•
Failure of the electrical system as a result of noncompliance
with the legal and applicable electrical directives and VDE requllations
0100, DIN 57113/ VDE 0113.
We recommend
that you read through the entire operating
instructions before putting into operation.
These operating instructions are to assist you in getting to know your
machine and utilize its proper applications.
The operating instructions contain important notes on how you work with
the machine safely. expertly. and economically. and how you can avoid
hazards. save repair costs. reduce downtime and increase the reliability
and service life of the machine.
In addition to the safety requirements contained in these operating
instructions. you must be careful to observe your country's applicable
regulations.
The operating instructions must always be near the machine. Put them in
a plastic folder to protect them from dirt and humidity. They must be read
by every operator before beginning work and observed conscientiously.
Only persons who have been trained in the use of the machine and have
been informed of the various dangers may work with the machine. The
required minimum age must be observed.
In addition to the safety requirements contained in these operating
instructions and your country.s applicable regulations, you should
observe the generally recognized technical rules concerning the
operation of woodworking machines.
Table of Contents
Product Specifications
Safetv Instructions
Accessories and Attachments
Carton Contents
Glossary of Terms
Assembly and Adjustments
Operation
Maintenance
Trouble shooting guide
Parts
Know Your Drill Press
Warranty
Warning:
To avoid electrical hazards. fire hazards. or damage to the tool. use proper circuit
protection.
Your drill press is wired at the factory for 230 V operation. Connect to a 230 V. 15
amp branch circuit and use a 15 amp time delay fuse or circuit breaker. To avoid
shock or fire. replace power cord immediately if it is worn. cut or damaged in any
way.
Technical Data
Chuck size
Speeds
Motor power
Spindle cone seat
Drilling chuck cone seat
Drilling chuck clamping range
Spindle rise and fall range
Chuck to worktable
Spindle base working range
Column spindle
Radial adjustment range
Swivelling range extension arm
Column diameter
Overal height
Weight
5
rab t 16x
rab s16x
mm
16
16
1/min
580-800-1520-
580-800-1520-
1800-2500
1800-2500
Watt
550
550
MK2
MK2
B 16
B 16
mm
1 – 16
1 – 16
mm
80
80
mm
365
685
mm
485
1230
mm
125 – 445
115 – 435
mm
320
320
mm
Left 70° /
left 60° /
right 60°
right 60°
mm
59,5
70
mm
935
1690
kg
37
63
Tabla de contenido
