Safety Regulations - GOLDONI MANOVELLISMO 70 Manejo Y Cuidado

1. SAFETY REGULATIONS

Prudence is essential when it comes to on the job safety and to
prevent industrial accidents.
The following cautions are offered here for this precise purpose.
Failure to follow the regulations given below exonerates our firm from all
civil and penal responsibility.
1. Any cleaning, service or maintenance work on the mower bar must only be
done with the engine switched off.
2. When transporting the mower, cover the cutter bar with its special guard.
3. If you are working of a steep gradient, a second operator must prevent the
tractor from sliding or tipping over. He can do this with the help of a tensioned
cable upstream from the tractor and at a safe distance.
4. The operator must make every effort to keep by-standers out of the machine's
working range.
5. Do not tamper with the machine's safety devices.
6. Safety plates and stickers are essential means of information on correct use
of the machine. Replace them when they are illegible or badly worn.
7. The operator must check to be certain that every part of the machine and,
especially the safety devices, are in good working condition and work to
specs. They should be kept in perfect working condition. If you note any
malfunctioning,
8. fix or repair them in good time. If necessary contact your nearest Assistance
Centre. Failure to observe these instructions releases manufacturer from all
liability.
Pay special attention to the stickers on the transmission:
fig.7: Refer to this Operating and Maintenance Manual.
fig.8: Danger! Immediate hazard from mower bar!
20